chain, light-duty, trade size 6/0, zinc coated steel
Published on Fri, 2023-01-13 07:46purchased for okedo quick-release rope idea
works for two smaller okedo (but not larger) because their taiko head iron rings are thin enough
min order of 2' purchased and was sufficient for one head. Additional 2' purchased 230214.
1100 lbs capacity (uncut)
not for lifting
approximately 6 links per foot
McMaster part no. 3594T96
carabiner, oval, 316 stainless, 3/16" thick, ID 1-7/8" x 11/16"
Published on Fri, 2023-01-13 07:43purchased for okedo quick-release rope idea
100lbs capacity
not for lifting
McMaster part no. 3777T11
carabiner, oval, 316 stainless, 3/16" thick, ID 2-3/8" x 9/16"
Published on Fri, 2023-01-13 07:42purchased for okedo quick-release rope idea
100lbs capacity
not for lifting
McMaster part no. 3777T16
s-hook, black oxide steel, 9/16" hook opening
Published on Wed, 2023-01-11 15:27not for lifting
100 lbs capacity
McMaster part no. 6056T8
s-hook, black oxide steel, 7/16" hook opening
Published on Wed, 2023-01-11 15:26not for lifting
100 lbs capacity
McMaster part no. 6056T7
carabiner, oval, black aluminum, 3/8" thick, 5/8" opening width
Published on Wed, 2023-01-11 15:25mistakenly purchased for okedo (too big)
not for lifting
McMaster part no. 31375T18
carabiner, oval, 316 stainless, 7/16" thick, 7/8" opening width
Published on Wed, 2023-01-11 15:24mistaken purchase for okedo (too big)
not for lifting
400lbs capacity
McMaster part no. 3777T15
carabiner, oval, 316 stainless, 3/8" thick, 1-3/16" inside width
Published on Wed, 2023-01-11 15:23mistakenly purchased for okedo (too big)
not for lifting
400lbs capacity
McMaster part no. 3777T13
okedo taiko, gakko, keyaki, black rope, Asano Taiko used
Published on Mon, 2023-01-09 18:23aka: okedo daiko, katsugi
keyaki, hourglass body. More oblong on one side than other (15-1/2" x 16-3/4").
two-tone heads, good condition (20-3/8" OD, 15-1/2" ID at lip)
5/16" PP Span black rope
red 1.3 okedo body fits inside body (barely).